Home › Services › Man and Digger › Micro Digger Hire
Micro Digger and Driver Hire in Milton Keynes, Bedford & Northampton

In short
If the only way into your back garden is a side gate, a narrow passage or a path between two houses, a normal mini digger will not fit. That is the job the micro digger is for. Steve brings his 1 tonne Bobcat micro digger, drives it himself, and works through gaps as narrow as 72 centimetres.
MK Landscaping Services is Steve’s business. He has run it from Olney since 2008 and covers Milton Keynes, Bedford, Northampton and the villages in between. When you book micro digger and driver hire, you get Steve, the machine, and a tracked dumper that carries the spoil back out through the same gap. You never touch the controls.
What micro digger and driver hire is
Micro digger and driver hire means a small tracked digger arrives with an operator who does the digging for you. It is the tight-access version of a man and digger service. You show Steve the ground, agree where the spoil goes, and he gets on with it.
It differs from self-drive hire in two ways. You do not need a ticket or any experience, and you are not left working out how to get a machine through your gate on your own. Steve checks the route before he unloads anything.
It also differs from his 2 tonne mini digger. The 2 tonne machine needs an opening of about 120 centimetres on most sites. When your access is narrower than that, the micro digger goes in instead.
When the micro digger is the right machine
Most micro digger jobs come down to one problem: the work is behind the house and the way in is narrow.
Side gates and passages down to 72 centimetres
With its tracks pulled in, the Bobcat gets through a gap of 72 centimetres. That gets it through a standard garden gate. What decides it is the narrowest point anywhere on the route, which is often a downpipe, a gatepost or a corner of the house rather than the gate itself.
Older properties and terraced back gardens
Older properties in Bedford and the surrounding villages tend to have narrow side accesses. The terraces around Abington and Kingsley in Northampton are the same, and a bigger machine simply cannot get round the back. These are the gardens where the micro digger and tracked dumper earn their keep.
Steps and ramps
Steve has confirmed the Bobcat can go over steps and up a ramp. Every route is different, so tell him how many steps there are and how steep any slope is, and he will tell you whether your way in works.
Courtyard gardens and shared paths
If a wheelbarrow makes it in, the Bobcat usually does too. Courtyard gardens, terraced passageways and shared paths are all places where it can dig out roots, clear old ground and level a garden in a fraction of the time it would take by hand.
The machines for tight access
On a tight job, everything that comes out of the ground has to leave the way the machine came in. These are the machines Steve chooses between.

2 tonne mini digger
Needs about 120 cm of access on most sites. Steve’s workhorse for footings, driveway dugouts and clearance wherever the access is wider.

1 tonne Bobcat micro digger
Gets through 72 cm with its tracks pulled in. Digs, takes out roots and levels ground behind narrow gates and passages.

Slanetrac HT1000 tracked dumper
Goes through the same 72 cm gap as the Bobcat and carries the spoil back out. In Steve’s words, it has a “high load capacity so excellent”.
The dumper matters as much as the digger. The muck leaves by machine, a load at a time, instead of by wheelbarrow. Tracks also spread the weight where wheels would sink, which helps wet lawns and soft ground get through the job without needing a repair of their own.
A tight-access job in Wolverton
The photos on this page are from a job Steve did in Wolverton. The only way into the garden was through a gate between two brick pillars, so the Bobcat went in. Steve dug out the roots, cleared the ground and levelled it.
In the first photo, the Bobcat stands in the gap between the gate pillars with its arm and bucket raised. In the second, it is inside the garden, facing back out through the open gate to the road. That gateway is the whole reason the job needed a micro digger.
Areas we cover for micro digger work
Steve works from Dagnall Rd in Olney and takes the micro digger across Milton Keynes, Bedford, Northampton and the villages between them.
Milton Keynes
Most estates have wider access, so the 2 tonne usually fits. The micro digger comes in for the exceptions, like the Wolverton job above. Steve also works regularly in Newport Pagnell, Stony Stratford, Bletchley and Willen. Estates, access and skip rules are covered under man and digger hire in Milton Keynes.
Bedford
Older properties in Bedford, Kempston, Biddenham, Bromham and Sharnbrook often have narrow side accesses, which is where the micro digger and tracked dumper are needed most. Bedford postcodes are covered in more detail under Bedford man and digger hire.
Northampton
The older terraces around Abington and Kingsley have tight access and need careful hand-dig finishing after the machine work. Newer builds out towards Wootton and Great Billing are more open. Abington, Kingsley and the newer estates are covered under man and digger work in Northampton.
The villages between
Olney, Emberton, Sherington, Hanslope and Ravenstone, where access tends to be easier but not always. Steve’s home patch is covered under man and digger in Olney.
Steve also covers digger hire in Newport Pagnell, and the full list is on the areas we cover page.
What a tight-access job looks like, step by step
- 1You measure and send photos
Measure the narrowest point of the route, then send Steve photos or a short video of the access and the ground.
- 2Steve picks the machines
He looks at the access and the ground type and decides between the micro digger with the tracked dumper, or the 2 tonne mini digger.
- 3You get a written quote
It sets out the work, how the spoil is handled and how long the job should take.
- 4The machines arrive
The smaller machines come on a trailer behind Steve’s van.
- 5Services check and marking out
Underground services are identified and the dig area is marked with paint or pegs.
- 6The dig
The Bobcat digs, and the tracked dumper carries the spoil out through the gate to a skip, a grab lorry or wherever you have agreed.
- 7Finishing by hand
Corners, edges and awkward bits are tidied by hand so the next stage starts on a clean site.
- 8Tidy and walk-round
Paths swept, gate latched, and a walk round with you before Steve leaves.
Before you call: measure the narrowest point
Steve says customers “normally tell me what they want doing but forget about telling me the widths of their gates”. It is the one detail that decides which machine comes, so check it before you ring.
Measured at its tightest. Check gateposts, downpipes, meters, bins and the gap between houses, as well as the gate.
How many steps there are on the way in, and roughly how steep any slope is.
A skip on the drive, a grab lorry on the road, or a low spot in the garden where it can be reused.
Room for the van and trailer, as close to the access as possible.
So neighbours know a machine will be coming through.
Common questions
Micro digger hire FAQs
Rated 4.9★ on Google from 31 reviews
What our clients say
“Steve did a great job in digging out my front lawn and grassy area by the side of my driveway and loading the mess into the skip. Tidied up the surrounding area well and would recommend if you need any digging done.”
“Steve has just finished adding a soak away for us and I fully recommend him. He was professional, very helpful and took time to understand what we needed. He’s prompt to get back to questions, punctual, considerate of neighbours and careful to clean up.”
“I needed some levelling off, foundations digging and a garden pathway digging out. Steve did a great job and got it all done in a day.”
Ready to start?
Book micro digger and driver hire with Steve
Got a garden behind a narrow gate? Measure the narrowest point, take a couple of photos, and send them to Steve. He will tell you which machine fits and give you a written quote.
MK Landscaping Services, Dagnall Rd, Olney MK46 5BJ
Monday to Friday 8 am to 5 pm, Saturday 8 am to 4 pm

